HLQ-B series battery sealant is one of our self-developed battery sealant products, non-flammable and environmentally friendly products, mainly used for nickel-metal hydride, cadmium-nickel batteries, shell mouth coating and button battery shell cover coating, sealing and preventing leakage of liquid to the battery.

• 

  Safe and environmentally friendly

  This product is non-flammable, effectively solving the problem of flammable and explosive in transportation, storage and use, and also meets the requirements of environmental protection, has passed REACH, ROHS certification.

• 

  Good media resistance and sealing performance at high temperatures

  This product in high temperature media resistance performance, dry glue drops lye does not corrode, immersed in lye does not dissolve, sealing effect is significantly better than the vacuum sealing wax and imported asphalt solution, and is superior to the now widely used imported asphalt sealer.

• 

  Simple process, easy to use

  This glue belongs to a liquid sealant, in order to meet the requirements of users have a variety of viscosity range for choice. The process is simple and easy to use.

• 

  Packaging

  It adopts 20L chemical iron drums for loading. The net weight of the product is 20KG per drum.

• 

  Storage conditions

  Store in a cool, well-ventilated and dry place. Avoid sunlight and keep away from fire sources and heat sources.

1. this product has volatile, sizing site away from fire, the workshop should be installed ventilation and exhaust facilities. 

2. after the use of the remaining glue should be immediately covered tightly, sealed storage, to prevent the solvent volatilization, is strictly prohibited to mix with water, dust and other substances. 

3. the viscosity of this product is greatly affected by the temperature and storage time, with the growth of the storage period and the temperature will increase significantly lower viscosity. It is recommended to control the amount of procurement, and should not be stored for a long time. 

4. Special circumstances, if the glue is obviously thickened, may produce uneven application of glue, overflow and other phenomena, at this time you need to add a special thinner to adjust the viscosity. Note that you can not just join the toluene, water and other solvents to dilute, so as not to affect the performance of the glue or produce other chemical reactions!

5. the product solvent evaporation rate by the temperature and humidity have a greater impact, when the temperature is lower than 15 ℃ or humidity higher than 85% should be taken to air dry.